Kaiden Kodo 180 Santoku
Shipping & Delivery Time (>>)
Kaiden Kodo 180 Santoku
A longer style of santoku with a deep 55mm blade for extra knuckle clearance.
Kodo Series by Kaiden
Kodo translates as ancient path. The textured finish is reminiscent of an ancient forest trail, the handles a burnt chestnut wood.
The blades are forged with a distal taper from rust resistant steel, heat treated to fantastic overall hardness, with speckles of super hardness that provide good wear resistance. This translates as excellent edge retention and great feedback on the stones when it comes time to resharpen.
The blade profile is slightly hollow ground, with microbevel and the symmetrical edge grind makes it suitable for left or right handed use.
Please note, this is one of the sharpest knife series we sell. Super thin behind the edge, so be careful what you cut.
Handles are a very tactile roasted chestnut with a super grippy feel and finished with a highly polished buffalo horn bolster.
Forged from one of those exotic next generation knife steels that rivals aosuper carbon steel. It borders on stainless but is best washed and dried after use as it can be a bit reactive. Likewise for the ‘almost’ stainless cladding.
- Textured Kodo finish
- Spectacular cutting
- Hammer forged from "almost stainless" steel core and cladding
- 50/50 edge grind suitable for left and right handed users
- As all knives are handmade the blade pattern and handle wood will vary from blade to blade
- Rounded octagonal Japanese chestnut handles
- PROS: The top 2 sharpest knife series at Chef's Armoury.
- CONS: Very thin behind the edge so be very careful not to cut anything too hard, and yes crackling, bacon, seeds, bones and thick rosemary stalks are hard
- Because of the fine edge, you will chip it if you aren't careful; cut hard items or are rough with your knives.
- Don't damage the edge by scraping it against the board
- Avoid tough tasks. Not a workhorse knife. Use as a 2nd knife for precise cuts.
- The blade is made from steel that on paper is almost stainless but in reality does tarnish if left wet so if you want to be fussy add a coat of camellia oil after use.
|Blade Thickness||3.2mm tapered||Tang||Pin tang|
|HRC (hardness)||64-65||Composition||almost stainless core and cladding|
|Edge||50:50 V bevel||Saya||Not included|
Orders are despatched Tuesday to Friday